Linux-Hardware

Virtualbox: VT-x is disabled in the BIOS for all CPU modes

Virtualbox kann eine VM nicht starten

Für die virtuelle Maschine win10 konnte keine neue Sitzung eröffnet werden.

VT-x is disabled in the BIOS for all CPU modes (VERR_VMX_MSR_ALL_VMX_DISABLED).

Fehlercode:NS_ERROR_FAILURE (0x80004005)
Komponente:ConsoleWrap
Interface:IConsole {872da645-4a9b-1727-bee2-5585105b9eed}

Im Bios muss Intel Virtualization Technology enabled werden.

default alt. text default alt. text

HP Notebook – 15-ac639ng

HP Notebook – 15-ac639ng

Seriennummer: CNDxxx
Produktnummer: T9P54EA#ABD
Grafik: AMD Radeon R5 M330
Boot-Menü F9

neue Firmware

wget http://mirrors.kernel.org/ubuntu/pool/main/l/linux-firmware/linux-firmware_1.156_all.deb

Literatur

Auf dem Windowsrechner

  • Fastboot deaktivieren

Probleme bei der Inbetriebnahme des WLAN-Adapter rtl8723be

$ lspci -nnk | grep -i net -A2
02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101/2/6E PCI Express Fast/Gigabit Ethernet controller [10ec:8136] (rev 07)
        Subsystem: Hewlett-Packard Company Device [103c:8136]
        Kernel driver in use: r8169
03:00.0 Network controller [0280]: Realtek Semiconductor Co., Ltd. RTL8723BE PCIe Wireless Network Adapter [10ec:b723]
        Subsystem: Hewlett-Packard Company Device [103c:804c]
        Kernel driver in use: rtl8723be
$ dmesg | grep wlan
[   21.520745] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  363.944865] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
$ rfkill list
0: hci0: Bluetooth
        Soft blocked: no
        Hard blocked: no
1: phy0: Wireless LAN
        Soft blocked: no
        Hard blocked: no
$ git clone https://github.com/lwfinger/rtlwifi_new
$ cd rtlwifi_new
$ make
$ sudo make install
$ sudo modprobe rtl8723be

Hardware-Informationen mit inxi anzeigen

Gefunden bei Linux und ich

$ inxi -F
System:    Host: c2012 Kernel: 3.13.0-32-generic x86_64 (64 bit) Desktop: KDE 4.13.2 Distro: Ubuntu 14.04 trusty
Machine:   Mobo: Gigabyte model: Z68XP-UD3 version: x.x Bios: Award version: F9 date: 02/21/2012
CPU:       Quad core Intel Core i7-2600 CPU (-HT-MCP-) cache: 8192 KB flags: (lm nx sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx)
           Clock Speeds: 1: 1600.00 MHz 2: 1600.00 MHz 3: 1600.00 MHz 4: 1600.00 MHz 5: 1600.00 MHz 6: 1600.00 MHz 7: 1600.00 MHz 8: 1600.00 MHz
Graphics:  Card: NVIDIA GF119 [GeForce GT 520]
           X.Org: 1.15.1 drivers: nvidia (unloaded: fbdev,vesa) Resolution: 1920x1200@60.0hz
           GLX Renderer: GeForce GT 520/PCIe/SSE2 GLX Version: 4.4.0 NVIDIA 331.38
Audio:     Card-1: NVIDIA GF119 HDMI Audio Controller driver: snd_hda_intel Sound: ALSA ver: k3.13.0-32-generic
           Card-2: Intel 6 Series/C200 Series Family High Definition Audio Controller driver: snd_hda_intel
Network:   Card: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller driver: r8169
           IF: eth0 state: up speed: 100 Mbps duplex: full mac: 50:e5:49:c5:bd:2e
Drives:    HDD Total Size: 2128.4GB (52.1% used) 1: id: /dev/sda model: SAMSUNG_SSD_830 size: 128.0GB
           2: id: /dev/sdb model: WDC_WD20EARS size: 2000.4GB
Partition: ID: / size: 37G used: 7.3G (21%) fs: ext4 ID: /home size: 55G used: 29G (55%) fs: ext4
           ID: /tmp size: 20G used: 60M (1%) fs: ext4 ID: /var size: 39G used: 2.8G (8%) fs: ext4
           ID: swap-1 size: 41.94GB used: 0.00GB (0%) fs: swap
RAID:      No RAID devices detected - /proc/mdstat and md_mod kernel raid module present
Sensors:   System Temperatures: cpu: 35.0C mobo: N/A gpu: 41C
           Fan Speeds (in rpm): cpu: N/A
Info:      Processes: 260 Uptime: 8:38 Memory: 2354.1/16032.2MB Client: Shell (bash) inxi: 1.9.17

Kubuntu 13.04 und Drucker Minolta Magicolor 2300W

Treiber für Drucker Minolta Magicolor 2300W

$ lsusb
Bus 005 Device 003: ID 0686:3009 Minolta Co., Ltd Magicolor 2300W
$ sudo apt-get install printer-driver-m2300W

Systemeinstellungen - Drucker - Drucker hinzufügen - Druckertreiber auswählen

Konica Minolta Magicolor 2300W foomatic m2300w

oder auch hier nachsehen:

http://sourceforge.net/projects/m2300w/

$ sudo apt-get install build-essential 
$ tar zxvf m2300w-0.51.tar.gz
$ cd m2300w-051
$ ./configure
$ make
$ sudo make install

Mein neuer Rechner c2012

128 GiB SSD

2 TB HD

Intel i7-2600

  • 3,4GHz
  • 8 MB Cache
$ lscpu  
Architecture:          x86_64  
CPU op-mode(s):        32-bit, 64-bit  
Byte Order:            Little Endian  
CPU(s):                8  
On-line CPU(s) list:   0-7  
Thread(s) per core:    2  
Core(s) per socket:    4  
CPU socket(s):         1  
NUMA node(s):          1  
Vendor ID:             GenuineIntel  
CPU family:            6  
Model:                 42  
Stepping:              7  
CPU MHz:               1600.000  
BogoMIPS:              6819.89  
Virtualization:        VT-x  
L1d cache:             32K  
L1i cache:             32K  
L2 cache:              256K  
L3 cache:              8192K  
NUMA node0 CPU(s):     0-7  

$ lspci 00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09) 00:01.0 PCI bridge: Intel Corporation Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port (rev 09) 00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04) 00:1a.0 USB Controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 05) 00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 05) 00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b5) 00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b5) 00:1c.4 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 5 (rev b5) 00:1c.5 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 6 (rev b5) 00:1c.6 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 7 (rev b5) 00:1c.7 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 8 (rev b5) 00:1d.0 USB Controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 05) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev a5) 00:1f.0 ISA bridge: Intel Corporation Z68 Express Chipset Family LPC Controller (rev 05) 00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 05) 01:00.0 VGA compatible controller: nVidia Corporation GT520 [GeForce GT520] (rev a1) 01:00.1 Audio device: nVidia Corporation HDMI Audio stub (rev a1) 03:00.0 PCI bridge: Integrated Technology Express, Inc. Device 8892 (rev 30) 04:02.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller (rev c0) 05:00.0 USB Controller: Etron Technology, Inc. EJ168 USB 3.0 Host Controller (rev 01) 06:00.0 USB Controller: Etron Technology, Inc. EJ168 USB 3.0 Host Controller (rev 01) 07:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 06) 08:00.0 SATA controller: Marvell Technology Group Ltd. 88SE9172 SATA 6Gb/s Controller (rev 11)

Festplatte defekt? smartctl

Einrichten von smartctl unter Suse und Debian:

Meine Festplatte SAMSUNG HD502IJ an /dev/sdb scheint nicht mehr richtig zu funktionieren:

$ sudo smartctl -s on --tolerance=permissive -a /dev/sdb  
smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.0.0-14-generic] (local build)  
Copyright (C) 2002-11 by Bruce Allen, [smartmontools.sourceforge.net](http://smartmontools.sourceforge.net)  

Vendor:               /3:0:0:0  
Product:                
User Capacity:        600.332.565.813.390.450 bytes [600 PB]  
Logical block size:   774843950 bytes  
>> Terminate command early due to bad response to IEC mode page  
unable to fetch IEC (SMART) mode page [scsi response fails sanity test]  
A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.  

Die Festplatte /dev/sdc liefert ein besseres Ergebnis:

$ sudo smartctl -s on --tolerance=permissive -a /dev/sdc  
smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.0.0-14-generic] (local build)  
Copyright (C) 2002-11 by Bruce Allen, [smartmontools.sourceforge.net](http://smartmontools.sourceforge.net)  

=== START OF INFORMATION SECTION ===  
Model Family:     Western Digital Caviar Blue Serial ATA  
Device Model:     WDC WD5000AAKS-00V1A0  
Serial Number:    WD-WMAWF0713191  
LU WWN Device Id: 5 0014ee 0ac59b7a4  
Firmware Version: 05.01D05  
User Capacity:    500.107.862.016 bytes [500 GB]  
Sector Size:      512 bytes logical/physical  
Device is:        In smartctl database [for details use: -P show]  
ATA Version is:   8  
ATA Standard is:  Exact ATA specification draft version not indicated  
Local Time is:    Fri Jan  6 18:56:37 2012 CET  
SMART support is: Available - device has SMART capability.  
SMART support is: Enabled  

=== START OF ENABLE/DISABLE COMMANDS SECTION ===  
SMART Enabled.  

=== START OF READ SMART DATA SECTION ===  
SMART overall-health self-assessment test result: PASSED  

General SMART Values:  
Offline data collection status:  (0x82) Offline data collection activity  
                                        was completed without error.  
                                        Auto Offline Data Collection: Enabled.  
Self-test execution status:      (   0) The previous self-test routine completed  
                                        without error or no self-test has ever   
                                        been run.  
Total time to complete Offline   
data collection:                ( 6960) seconds.  
Offline data collection  
capabilities:                    (0x7b) SMART execute Offline immediate.  
                                        Auto Offline data collection on/off support.  
                                        Suspend Offline collection upon new  
                                        command.  
                                        Offline surface scan supported.  
                                        Self-test supported.  
                                        Conveyance Self-test supported.  
                                        Selective Self-test supported.  
SMART capabilities:            (0x0003) Saves SMART data before entering  
                                        power-saving mode.  
                                        Supports SMART auto save timer.  
Error logging capability:        (0x01) Error logging supported.  
                                        General Purpose Logging supported.  
Short self-test routine   
recommended polling time:        (   2) minutes.  
Extended self-test routine  
recommended polling time:        (  84) minutes.  
Conveyance self-test routine  
recommended polling time:        (   5) minutes.  
SCT capabilities:              (0x303f) SCT Status supported.  
                                        SCT Error Recovery Control supported.  
                                        SCT Feature Control supported.  
                                        SCT Data Table supported.  

SMART Attributes Data Structure revision number: 16  
Vendor Specific SMART Attributes with Thresholds:  
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE  
  1 Raw_Read_Error_Rate     0x002f   200   200   051    Pre-fail  Always       -       961  
  3 Spin_Up_Time            0x0027   141   140   021    Pre-fail  Always       -       3950  
  4 Start_Stop_Count        0x0032   100   100   000    Old_age   Always       -       875  
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0  
  7 Seek_Error_Rate         0x002e   200   200   000    Old_age   Always       -       0  
  9 Power_On_Hours          0x0032   086   086   000    Old_age   Always       -       10786  
 10 Spin_Retry_Count        0x0032   100   100   000    Old_age   Always       -       0  
 11 Calibration_Retry_Count 0x0032   100   100   000    Old_age   Always       -       0  
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       845  
192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always       -       54  
193 Load_Cycle_Count        0x0032   200   200   000    Old_age   Always       -       820  
194 Temperature_Celsius     0x0022   102   093   000    Old_age   Always       -       41  
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0  
197 Current_Pending_Sector  0x0032   200   200   000    Old_age   Always       -       0  
198 Offline_Uncorrectable   0x0030   200   200   000    Old_age   Offline      -       0  
199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       0  
200 Multi_Zone_Error_Rate   0x0008   200   199   000    Old_age   Offline      -       3  

SMART Error Log Version: 1  
No Errors Logged  

SMART Self-test log structure revision number 1  
No self-tests have been logged.  [To run self-tests, use: smartctl -t]  


SMART Selective self-test log data structure revision number 1  
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS  
    1        0        0  Not_testing  
    2        0        0  Not_testing  
    3        0        0  Not_testing  
    4        0        0  Not_testing  
    5        0        0  Not_testing  
Selective self-test flags (0x0):  
  After scanning selected spans, do NOT read-scan remainder of disk.  
If Selective self-test is pending on power-up, resume after 0 minute delay.  

DVB-C Technisat nach Kernel-Update

Nach jedem Kernel-Update ist in Kaffeine der Schalter für DVB verschwunden. Der Treiber von mir benutzte Treiber s2-liplianin muss neu installiert werden. Dafür benutze ich das folgende Script (~/bin/dvb_nach_kernel_update.sh):

#!/bin/bash  
#dieses script aufrufen um nach einem kernel update  
#den dvb treiber anzupassen  
cd ~/bin  
echo "Den alten Treiber loeschen ..."  
#hier nur su verwenden, damit das Passwort sofort eingegeben werden muss  
sudo rm -R s2-liplianin  
echo "Die Quellen von s2-liplianin neu herunterladen ..."  
hg clone [mercurial.intuxication.org/hg/s2-liplianin](http://mercurial.intuxication.org/hg/s2-liplianin)  
cd s2-liplianin/  
echo "Die Quellen von s2-liplianin compilieren ..."  
make  
echo "Die Quellen von s2-liplianin installieren (ROOT-Passwort eingeben.) ..."  
sudo make install  
echo "Es ist ein Reboot nötig um den Treiber zu laden..."  

Seiten