Festplatte defekt? smartctl

Einrichten von smartctl unter Suse und Debian:

Meine Festplatte SAMSUNG HD502IJ an /dev/sdb scheint nicht mehr richtig zu funktionieren:

$ sudo smartctl -s on --tolerance=permissive -a /dev/sdb  
smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.0.0-14-generic] (local build)  
Copyright (C) 2002-11 by Bruce Allen, [smartmontools.sourceforge.net](http://smartmontools.sourceforge.net)  

Vendor:               /3:0:0:0  
Product:                
User Capacity:        600.332.565.813.390.450 bytes [600 PB]  
Logical block size:   774843950 bytes  
>> Terminate command early due to bad response to IEC mode page  
unable to fetch IEC (SMART) mode page [scsi response fails sanity test]  
A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.  

Die Festplatte /dev/sdc liefert ein besseres Ergebnis:

$ sudo smartctl -s on --tolerance=permissive -a /dev/sdc  
smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.0.0-14-generic] (local build)  
Copyright (C) 2002-11 by Bruce Allen, [smartmontools.sourceforge.net](http://smartmontools.sourceforge.net)  

=== START OF INFORMATION SECTION ===  
Model Family:     Western Digital Caviar Blue Serial ATA  
Device Model:     WDC WD5000AAKS-00V1A0  
Serial Number:    WD-WMAWF0713191  
LU WWN Device Id: 5 0014ee 0ac59b7a4  
Firmware Version: 05.01D05  
User Capacity:    500.107.862.016 bytes [500 GB]  
Sector Size:      512 bytes logical/physical  
Device is:        In smartctl database [for details use: -P show]  
ATA Version is:   8  
ATA Standard is:  Exact ATA specification draft version not indicated  
Local Time is:    Fri Jan  6 18:56:37 2012 CET  
SMART support is: Available - device has SMART capability.  
SMART support is: Enabled  

=== START OF ENABLE/DISABLE COMMANDS SECTION ===  
SMART Enabled.  

=== START OF READ SMART DATA SECTION ===  
SMART overall-health self-assessment test result: PASSED  

General SMART Values:  
Offline data collection status:  (0x82) Offline data collection activity  
                                        was completed without error.  
                                        Auto Offline Data Collection: Enabled.  
Self-test execution status:      (   0) The previous self-test routine completed  
                                        without error or no self-test has ever   
                                        been run.  
Total time to complete Offline   
data collection:                ( 6960) seconds.  
Offline data collection  
capabilities:                    (0x7b) SMART execute Offline immediate.  
                                        Auto Offline data collection on/off support.  
                                        Suspend Offline collection upon new  
                                        command.  
                                        Offline surface scan supported.  
                                        Self-test supported.  
                                        Conveyance Self-test supported.  
                                        Selective Self-test supported.  
SMART capabilities:            (0x0003) Saves SMART data before entering  
                                        power-saving mode.  
                                        Supports SMART auto save timer.  
Error logging capability:        (0x01) Error logging supported.  
                                        General Purpose Logging supported.  
Short self-test routine   
recommended polling time:        (   2) minutes.  
Extended self-test routine  
recommended polling time:        (  84) minutes.  
Conveyance self-test routine  
recommended polling time:        (   5) minutes.  
SCT capabilities:              (0x303f) SCT Status supported.  
                                        SCT Error Recovery Control supported.  
                                        SCT Feature Control supported.  
                                        SCT Data Table supported.  

SMART Attributes Data Structure revision number: 16  
Vendor Specific SMART Attributes with Thresholds:  
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE  
  1 Raw_Read_Error_Rate     0x002f   200   200   051    Pre-fail  Always       -       961  
  3 Spin_Up_Time            0x0027   141   140   021    Pre-fail  Always       -       3950  
  4 Start_Stop_Count        0x0032   100   100   000    Old_age   Always       -       875  
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail  Always       -       0  
  7 Seek_Error_Rate         0x002e   200   200   000    Old_age   Always       -       0  
  9 Power_On_Hours          0x0032   086   086   000    Old_age   Always       -       10786  
 10 Spin_Retry_Count        0x0032   100   100   000    Old_age   Always       -       0  
 11 Calibration_Retry_Count 0x0032   100   100   000    Old_age   Always       -       0  
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       845  
192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age   Always       -       54  
193 Load_Cycle_Count        0x0032   200   200   000    Old_age   Always       -       820  
194 Temperature_Celsius     0x0022   102   093   000    Old_age   Always       -       41  
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age   Always       -       0  
197 Current_Pending_Sector  0x0032   200   200   000    Old_age   Always       -       0  
198 Offline_Uncorrectable   0x0030   200   200   000    Old_age   Offline      -       0  
199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age   Always       -       0  
200 Multi_Zone_Error_Rate   0x0008   200   199   000    Old_age   Offline      -       3  

SMART Error Log Version: 1  
No Errors Logged  

SMART Self-test log structure revision number 1  
No self-tests have been logged.  [To run self-tests, use: smartctl -t]  


SMART Selective self-test log data structure revision number 1  
 SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS  
    1        0        0  Not_testing  
    2        0        0  Not_testing  
    3        0        0  Not_testing  
    4        0        0  Not_testing  
    5        0        0  Not_testing  
Selective self-test flags (0x0):  
  After scanning selected spans, do NOT read-scan remainder of disk.  
If Selective self-test is pending on power-up, resume after 0 minute delay.